HANDLING EQUIPMENT

AUTO TENSIONER FOR ROPE

ref: MAT

  • Used to work the Guillotine Gate from the opposite end of the race.
  • Designed to keep the rope tort in the air so not getting in the way of the race.
  • Heavy duty steel construction.
  • Hot dip galvanised for a long life.

GUILLOTINE GATE

ref: MGG18

  
  • Guillotine gate ideal control gate for entry to race system.
  • Gate slides up and down on runner and is workable through rope and pully system.
  • Gate also able to swing open.
  • Acts as a joiner for race and has three positions to taper race for lambs.
  • Heavy duty steel construction.
  • Hot dip galvanised for a long life.
  • Overall dimensions: 1.8m high, 0.9m wide.

SLIDE STOP GATE

ref: MSG18

  • Replaces race joiner in the race.
  • Stops sheep advancing in the race.
  • Lateral operation.
  • Heavy duty steel construction.
  • Hot dip galvanised for a long life.
  • Overall dimensions: 0.9m high, 1.0m wide.

FOLDING STOP GATE

ref: MFG18

  • Heavy duty design with galvanized sheet sides.
  • Quickest, easiest to use stop gate for use in race.
  • Latches to hold it open or shut.
  • Internal space 0.45m wide, 0.9m high.
  • Perfect stop gate to accompany draft gate.

DRAFT GATE TWO WAY

ref: MDG18
  • Robust heavy duty construction.
  • Fast and easy to opperate.
  • Allows sheep to see through it.
  • Pins directly in front of weigher or stop gate.
  • Hook to lock it open left or right.
  • Hot dip galvanised.

COMBINATION STOP/DRAFT GATE

ref: MCG18

  • Combines a drafting gate with a stop gate.
  • Robust heavy duty construction.
  • Fast and easy to opperate.
  • Allows sheep to see through it.
  • Pins directly in front of race.
  • Hot dip galvanised.

DRAFT GATE THREE WAY

ref: MDG18/3

  • A drafting gate to sort left, right or straight on.
  • Robust heavy duty construction.
  • Fast and easy to opperate.
  • Allows sheep to see through it.
  • Pins directly in front of stop gate or weigher.
  • Hot dip galvanised.

RACE JOINER

ref: MJ18

  • Junction between race sections to maintain width and stability.
  • Adjustable in three locations each side.
  • Pins to race via rod / link rod system.
  • Dimensions: 0.9m high, 0.5m wide.
  • Hot dip galvanised for a long life.

NON-RETURN CATCHES

ref: MNR

 

  • Placed inside race to prevent sheep backing up.
  • Sprung so sheep can go forward but not back.
  • Pins to race via sleeve and bolt.
  • Hot dip galvanised for a long life.

RACE SWING GATE IN JOINER

ref: MRSG
  • Junction between race sections to maintain width and stability including a swing gate.
  • Adjustable in three locations each side.
  • Pins to race via rod / link rod system.
  • Dimensions: 0.9m high, 0.5m wide.
  • Hot dip galvanised for a long life.

NON-RETURN CATCHES IN RACE JOINER

ref: MNRJ

  • Junction between race sections to maintain width and stability with inbuilt non-return catches.
  • Pins to race via rod / link rod system.
  • Dimensions: 0.9m high, 0.5m wide.
  • Hot dip galvanised for a long life.

HOSKING GATE IN FRAME

ref: MHF

  • Forcing gate designed to push the sheep into a semi-circular pen.
  • Once sheep pushed into race, gate able to slide open ready to use on next group of sheep.
  • Overcomes the inherent problem of traditional gate opening against flock.
  • Dimensions: 1.1m high, 2.6m long.
  • Hot dip galvanised for a long life.

EWE TURN CURVE

ref: MET90
  • A pair of flat sheeted hurdles curved to form a 90 degree angle.
  • Improves the movement of ewes into the race by restricting their forward vision.
  • Simple but very efficient.
  • Dimensions: 0.9m high, 1.22m long, 0.55m wide.
  • Hot dip galvanised for a long life.

Back to the product list.