LAMBING AND FEEDING EQUIPMENT

LAMBING HURDLE PART MESH

ref: MLHM

lambmesh1

  • Part mesh.
  • Lightweight.
  • Adaptable.
  • Heavy duty steel construction.
  • Hot dip galvanised.
  • Available 0.9m, 1m, 1.2m, 1.5m, 1.8m long x 0.9m high.

LAMBING HURDLE PART SHEETED

ref: MLHS

lambmesh1

  • Part galvanized sheeted.
  • Lightweight.
  • Adaptable.
  • Heavy duty steel construction.
  • Hot dip galvanised.
  • Available 0.9m, 1m, 1.2m, 1.5m, 1.8m long x 0.9m high.

WALK THROUGH TROUGH

ref: MWTT

  • Modular trough system.
  • 9 foot run comprising trough, two end joiners and two 9 foot open railed hurdles.
  • Hurdles can be utilised in other systems, not exclusive to the trough.
  • Heavy duty steel construction.
  • Hot dip galvanised for a long life.
  • Overall lengths available - 1.8m and 2.75m.
  • Trough 50cm wide by 25cm deep.

WALK THROUGH HAYRACK

ref: MH

  • Robust single unit design.
  • Support strips for durability. Fully welded end plates for trough.
  • Two way trough combines with walk through hayrack for maximum efficiency.
  • Support bars beneath trough also act as barrier for lambs, working as penning.
  • Ends come with lugs or holes for easy fixing.
  • Heavy duty steel construction.
  • Hot dip galvanised for a long life.
  • Overall lengths available - 1.8m and 2.75m.

SINGLE SIDED RACK / TROUGH

ref: MHSS

  • Robust single unit design.
  • Support strips for durability. Fully welded end plates for trough.
  • Trough combines with hayrack for maximum efficiency.
  • Support bars beneath trough also act as barrier for lambs, working as penning.
  • Ends come with lugs for easy fixing.
  • Heavy duty steel construction.
  • Hot dip galvanised for a long life.
  • Overall lengths available - 1.8m and 2.75m.

PIVOT TROUGH

ref: MSI

  • Easy to use spring bolt fixing, allowing the trough to swing into the pen.
  • Keeps you out flock when feeding.
  • Design also acts as a barrier for penning.
  • Robust design.
  • Hot dip galvanised for a long life.
  • Overall lengths available - 1.8m and 2.75m.

CLIP OVER HAY BASKETS

ref: MCH

  • Fits on lambing hurdle to serve two pens.
  • Easy to move basket.
  • Hay saving.
  • Hot dip galvanised.
  • Available 0.45m long, 0.50m high, 0.45m wide.

HOOK OVER HAY RACK

ref: MHR

  • Easy to fit to any hurdle to serve pens.
  • Easy to move rack.
  • Hay saving.
  • Hot dip galvanised.
  • Available at 0.60m or 1.2m long.

HOOK OVER NUT TROUGH

ref: MHT

  • Easy to fit to any hurdle.
  • Easy to move.
  • Hot dip galvanised.
  • Available at 0.60m, 1.07m, 1.37m, 1.67m, and 2.75m long.

LAMB ADOPTER

ref: MA1

  • Enables orphan lambs to nurse from another ewe.
  • Ewe can neither see or smell the lamb.
  • Movable bar adjusts to choice of 3 widths for ewes neck
  • 'V' frame design for best use.
  • Heavy duty steel construction.
  • Hot dip galvanised.
  • Available 0.9m x 0.5m

LAMB CREEP HURDLE

ref: MLC6

  • Fully adjustable hurdle with fiveposition locations.
  • Easy to move 'trombone'.
  • Versatile hurdle can be utilised for other uses by having same dimensions as standard hurdles.
  • Heavy duty steel construction.
  • Hot dip galvanised.
  • Available 1.8m long

RING FEEDER

ref: MRF

  • 24 places ring feeder.
  • Sheeted to 0.28m.
  • Made in two semi circles.
  • Add on sections increase feeders capacity.
  • Heavy duty steel construction.
  • Hot dip galvanised.
  • Available 1.6m long x 0.9m high x 1.5m wide.

Back to the product list.